BAK Industries Tonneau Cover
- BAK39130
- Roll-Up - Hard
- Rack Compatible
- Flush Profile - Inside Bed Rails
- BAK Industries
- Aluminum and Vinyl
- Vinyl Grain
- Tailgate Lock
- Opens at Tailgate
The Revolver X2 tonneau combines hard cover strength and security with soft cover convenience. The heavy-duty aluminum and vinyl cover sits flush on your vehicle and rolls up for full truck bed access. Easy, no-drill installation.
Features:
- Custom-fit tonneau cover protects your cargo and your vehicle's bed from the elements
- Aerodynamic style reduces wind drag, improving gas mileage
- Hybrid design offers strength and durability of hard cover with style and convenience of soft cover
- Hinged, 1/4" thick, rustproof aluminum slats offer more flexibility than paneled hard tonneaus, so you can roll cover up
- UV-resistant, textured black vinyl skin gives sleek, soft tonneau look
- Roll-up cover provides full truck bed access in seconds without having to be removed
- Simple operation - pull cable to release cover, then roll cover up
- Sturdy nylon straps with plastic buckles secure rolled up tonneau at the cab
- Ultra-flush, low-profile cover sits inside your truck bed rails and has no visible hinges
- Compatible with stake-pocket-mounted accessories and raised side rails
- Convenient latching system at the tailgate fastens the cover along the length of your truck bed
- Side rails rotate to lock down the sides of cover
- Heavy-duty, gusset-reinforced levers secure cover at the tailgate
- Cover and truck bed are secure when tailgate is closed and locked
- Matte black rubber seals help to keep water from seeping in
- Aircraft-grade, rustproof aluminum rails with black powder coat finish create base for tonneau
- Easy, no-drill installation
- Frame rails clamp to the inside of your truck bed side rails
- Mounting plates ensure that frame rails are properly positioned on your truck bed side rails
- Included bolts secure front hinge rail to frame rails at the cab of your truck
- Made in the USA
- 3-Year warranty
![BAK Revolver X2 Tonneau Cover Operation Animation]()
Get the advantages of both a hard tonneau cover and a soft tonneau cover for your vehicle with the Revolver X2. This hybrid tonneau likely has an identity crisis. It's built like a hard cover, but it looks and acts like a soft cover. With the Revolver X2, you get the strength, durability, and security of a hard tonneau and the sleek look and convenience of a soft, roll-up tonneau - all while protecting your truck bed and cargo and helping to improve your fuel mileage.
Strong, Convenient Hybrid Design
![BAK Revolver X2 Tonneau Cover Closed and Rolled Up]()
The secret to the Revolver X2's versatility is the aluminum slats on the underside of the cover that make it strong, seamless, and flexible. These individual, hinged slats give the cover its rugged body, while also allowing enough flexibility for the cover to be rolled up. Atop the slats is a tough, 1-piece vinyl layer that adds to the tonneau's sleek look and overall durability while also keeping the slats perfectly aligned. As a result, the Revolver X2 will roll up evenly every time, unlike ordinary soft vinyl covers that can get lopsided as you maneuver them.
Low-Profile Appearance
![BAK Revolver X2 Tonneau Cover Low Profile and Open Stake Pockets]()
Unlike other tonneau covers that sit 1/2" or more above your truck bed rails, the Revolver X2 sits nearly flush with your rails for a clean, ultra-sleek look.
Full Truck Bed Access
![BAK Revolver X2 Tonneau Cover Open]()
The Revolver X2 gives you full use of your truck bed in a matter of seconds - just roll up the cover and secure it behind the cab. As a result, you can tote around all your gear without having to remove the tonneau. And because the Revolver X2 mounts inside your truck bed rails, you can still use your truck bed stake pockets to mount accessories like tie-down anchors.
Simple, One-Person Operation
The Revolver X2 is simple to operate. Following installation, just roll the cover out and press down on the rearmost slat at the tailgate to secure the tonneau in place.
![BAK Revolver X2 Tonneau Cover Locking Diagram]()
The built-in latches not only lock down the back end of the tonneau, but they also fasten the sides of the Revolver X2 along the length of the frame rails. The rail tooth runs the entire length of each frame rail. It rotates downward to lock the side rail into the sides of the cover.
![BAK Revolver X2 Tonneau Cover Release Cord]()
When the cover is rolled out and the rear slat is pressed down at the tailgate, the latches on both sides engage. When this happens, the integrated teeth pivot down and rest on top of each slat of the rolled-out cover. Closing the rear slat effectively pins the cover to the rails, ensuring that the cover stays closed from front to back. It's that simple - no Velcro to seal or snaps to wrestle with. When your tailgate is closed and locked, no one will be able to get through the cover, thereby safeguarding your truck bed and its contents. The cover automatically secures as the locking levers at the tailgate engage. These sturdy levers have reinforced gussets that give them added strength and durability. And they will never need adjustment.
![BAK Revolver X2 Tonneau Cover Release Cord]()
To roll up the cover, unlatch the rear slat by dropping the tailgate and pulling either of the 2 release cords located along the bottom corners of the slat's housing. Either cord will release both of the latches so that you can raise the rear slat. When the latches are disengaged, the teeth roll back into the frame rails, releasing the sides of the cover so that you can easily roll it up. Just fold the rear slat over and roll up the cover the rest of the way.
![BAK Revolver X2 Tonneau Cover Rolled Up and Secured at Tailgate]()
![Diagram of rubber bumpers on inside of tonneau cover]()
Then secure the tonneau behind the cab with built-in nylon straps and sturdy plastic buckles. These straps help to keep the bundled tonneau from contacting your cab while you drive. And 4 rubber bumpers act as cushioned barriers between the cover and your truck cab.
Heavy-Duty Construction
![BAK Revolver X2 Tonneau Cover Half Rolled Up]()
The Revolver X2's rugged aluminum and vinyl construction makes it an ideal match for your truck, no matter what you do while at work or play. This cover is strong enough to hold up to 400 lbs of evenly distributed weight when it's rolled out. The 1/4" thick, aircraft-grade aluminum slats are covered with a textured black vinyl skin for superior resistance to impacts, UV rays, and weather. This skin is what gives the tonneau its soft, sleek look. While the Revolver X2 may look like a soft cover, its aluminum skeleton provides exceptional security because it cannot be cut through in the same way that a standard soft vinyl cover can be.
![BAK Revolver X2 Tonneau cover underside]()
Felt strips on the underside of the tonneau help to keep the slats from scuffing the vinyl top as you roll up the cover. The soft felt also shields your hands when the cover has gotten hot or cold. And rubber strips overlay your truck's side rails, cab rail, and tailgate, creating a seal that helps to conceal any gaps and works to prevent water from seeping in.
Easy, No-Drill Installation
![BAK Revolver X2 Tonneau Cover Installation]()
Installing the Revolver X2 is simple. All you need is a wrench, and you don't have to do any drilling. The tonneau's frame rails clamp to the inside of your truck bed side rails to create a base for the cover. The included bolts secure the front hinge rail to the frame rails at the cab.
![BAK Revolver X2 Tonneau Cover Installation]()
![BAK Revolver X2 Tonneau Cover Installation]()
Slotted brackets at the ends of the tonneau side rails allow the bolts to shift in case you need to adjust the cover to achieve a snug fit. These brackets ensure proper alignment of the tonneau frame on your truck bed side rails. This eliminates trial and error in installing your rails - you won't have to put them on and then take them off again to get the correct fit. Pre-installed shims and spacers also help to ensure that the Revolver X2 rails are installed squarely on your truck bed.
39130 BAK Industries BAK Revolver X2 Hard Roll Up Truck Bed Cover
Installation Details 
This Product Fits The Following Vehicles
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.